Supermicro X11SCE-F - Page 13

13
Chapter 1: Introduction
Motherboard Features
Power Management
• Power button override mechanism
• Intel Intelligent Power Node Manager (available when the Supermicro Power Manager [SPM] is installed and a special
power supply is used)
• Management Engine (ME)
System Health Monitoring
• Onboard voltage monitoring for +1.8V, +3.3V, +3.3V standby, +5V, +5V standby, +/-12V, VBAT, HT, Memory, PCH Temp.,
System Temp., Memory Temp.
• CPU switching phase voltage regulator
• CPU System LED and control
• CPU Thermal Trip support
• CPU Thermal Design Power (TDP)
System Management
• Trusted Platform Module (TPM) support
• PECI (Platform Environment Control Interface) 3.1 support
• UID (Unit Identication)/Remote UID
• System resource alert via SuperDoctor® 5
• Watch Dog, NMI
LED Indicators
• CPU/System Overheat
• UID/remote UID
• Fan Failed
Dimensions
• 4.6" (L) x 13.08" (W) (116.84 mm x 332.23 mm)
Note 1: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specications for proper CPU TDP sizing.
Note 2: For IPMI conguration instructions, please refer to the Embedded IPMI Con-
guration User's Guide available at http://www.supermicro.com/support/manuals/.
Note 3: It is strongly recommended that you change BMC log-in information upon initial
system power-on. The manufacture default username is ADMIN and the password is
ADMIN. For proper BMC conguration, please refer to https://www.supermicro.com/
products/nfo/IPMI.cfm.