Supermicro X11SCE-F - Quick Reference Table

11
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable Pins 1-2 (Enable)
JPME1 ME Recovery Pins 1-2 (Normal)
JPME2 Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Timer Pins 1-2 (Normal)
Connector Description
BT1 Onboard CMOS battery socket
I-SATA6, I-SATA0
SATA 3.0 Ports (I-SATA6 is on the topside of the motherboard, while I-SATA0 is on the bottom)
Five SATA 3.0 ports via the backplane, one SATA 3.0 port via the right angle receptor connector
J22 Connector for AOM-BPN-MC12S Backplane
J25 M.2 PCI-E 3.0 x4 slot (M-Key 2280/22110 with SATA3 support)
JKVM1 KVM Connector for VGA, 2 USB 2.0 and COM Ports
JSD1 SATA DOM Power Connector
JTPM1 Trusted Platform Module (TPM)/Port 80 connector
MICRO-LP CPU MICRO-LP PCI-E 3.0 x8 Slot
SRW3, SRW4 M.2 Holding Screws
SW2 Power Button
UID Unit Identier Switch
LED Description Status
BMC_HB_LED1 BMC Heartbeat LED Blinking Green: BMC normal
LED1 UID LED Solid Blue: Unit Identied
LED5 Fan Fail/Overheat LED
Solid Red: Overheating
Blinking Red: Fan Failure or Power Failure