Supermicro X11SCE-F - Connectors and Jumpers

30
Super X11SCE-F User's Manual
J25
BMC_HB_LED1
A
C
JTPM1
BT1
+
JBT1
LED5
A
C
I-SATA6
JSD1
SW2
J22
JKVM1:
JPME2
JPG1
JPME1
JBR1
SRW3
SRW4
BIOS
LICENSE
MAC CODE
DESIGNED IN USA
X11SCE-F
REV:1.02
USB0/1
UID
CPU MICRO-LP PCIE 3.0 X8
DIMMB2 DIMMA2 DIMMB1 DIMMA1
VGA
CPU
JSD1:SATA DOM POWER
BAR CODE
JWD1
TPM Header
The JTPM1 header is used to connect a Trusted Platform Module (TPM)/Port 80, which is
available from a third-party vendor. A TPM/Port 80 connector is a security device that supports
encryption and authentication in hard drives. It allows the motherboard to deny access if the
TPM associated with the hard drive is not installed in the system. Go to the following link for
more information on the TPM: http://www.supermicro.com/manuals/other/TPM.pdf.
1. TPM/Port 80 Header
1
Trusted Platform Module Header
Pin Denitions
Pin# Denition Pin# Denition
1 +3.3V 2 SPI_CS#
3 RESET# 4 SPI_MISO
5 SPI_CLK 6 GND
7 SPI_MOSI 8
9 +3.3V Stby 10 SPI_IRQ#
2.5 Connectors