Supermicro X11SCE-F - Page 38

38
Super X11SCE-F User's Manual
1. ME Recovery
2. Manufacturing Mode
Management Engine (ME) Recovery
Use jumper JPME1 to select ME Firmware Recovery mode, which will limit resource
allocation for essential system operation only in order to maintain normal power operation
and management. In the single operation mode, online upgrade will be available via Recovery
mode. Refer to the table below for jumper settings.
ME Recovery Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal
Pins 2-3 ME Recovery
ME Manufacturing Mode
Close JPME2 to bypass SPI ash security and force the system to use the Manufacturing
Mode, which will allow the user to ash the system rmware from a host server to modify
system settings. Refer to the table below for jumper settings.
Manufacturing Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal (Default)
Pins 2-3 Manufacturing Mode
J25
BMC_HB_LED1
A
C
JTPM1
BT1
+
JBT1
LED5
A
C
I-SATA6
JSD1
SW2
J22
JKVM1:
JPME2
JPG1
JPME1
JBR1
SRW3
SRW4
BIOS
LICENSE
MAC CODE
DESIGNED IN USA
X11SCE-F
REV:1.02
USB0/1
UID
CPU MICRO-LP PCIE 3.0 X8
DIMMB2 DIMMA2 DIMMB1 DIMMA1
VGA
CPU
JSD1:SATA DOM POWER
BAR CODE
JWD1
1
2