Supermicro X11SCE-F - Page 40

40
Super X11SCE-F User's Manual
1. Watch Dog Timer
J25
BMC_HB_LED1
A
C
JTPM1
BT1
+
JBT1
LED5
A
C
I-SATA6
JSD1
SW2
J22
JKVM1:
JPME2
JPG1
JPME1
JBR1
SRW3
SRW4
BIOS
LICENSE
MAC CODE
DESIGNED IN USA
X11SCE-F
REV:1.02
USB0/1
UID
CPU MICRO-LP PCIE 3.0 X8
DIMMB2 DIMMA2 DIMMB1 DIMMA1
VGA
CPU
JSD1:SATA DOM POWER
BAR CODE
JWD1
1
Watch Dog
JWD1 controls the Watch Dog function. Watch Dog is a monitor that can reboot the system
when a software application hangs. Jumping pins 1-2 will cause Watch Dog to reset the
system if an application hangs. Jumping pins 2-3 will generate a non-maskable interrupt
signal for the application that hangs. Watch Dog must also be enabled in BIOS. The default
setting is Reset.
Note: When Watch Dog is enabled, users need to write their own application software
to disable it.
Watch Dog
Jumper Settings
Jumper Setting Denition
Pins 1-2 Reset (Default)
Pins 2-3 NMI
Open Disabled