Supermicro X11SCE-F - Page 54

Super X11SCE-F User's Manual
54
CPU Conguration
The following CPU information will display:
• Processor type
• CPU Signature
• Microcode Revision
• CPU Speed
• L1 Data Cache
• L1 Instruction Cache
• L2 Cache
• L3 Cache
• L4 Cache
• VMX
• SMX/TXT
CPU Flex Ratio Override
Select Enabled to activate CPU Flex Ratio programming. The ex ratio should be under the
CPU's max ratio. The options are Disabled and Enabled.
*If the feature above is set to Enabled, "CPU Flex Ratio Setting" will become available
for conguration:
CPU Flex Ratio Settings
When CPU Flex Ratio override is enabled, this feature sets the value for the CPU Flex Ratio.
The value must be between the maximum efciency ratio and maximum non-turbo ratio. The
default value is dependent on the CPU.
Hardware Prefetcher
If set to Enable, the hardware prefetcher will prefetch streams of data and instructions from
the main memory to the L2 cache to improve CPU performance. The options are Disabled
and Enabled.
Adjacent Cache Line Prefetch
The CPU prefetches the cache line for 64 bytes if this feature is set to Disabled. The CPU
prefetches both cache lines for 128 bytes as comprised if this feature is set to Enabled. The
options are Disabled and Enabled.