Supermicro X11SCE-F - Page 60

Super X11SCE-F User's Manual
60
Internal Graphics
Select Auto to keep an internal graphics device installed on an expansion slot supported
by the CPU to be automatically enabled. The options are Auto, Disabled, and Enabled.
VT-d
Select Enabled to activate Intel Virtualization Technology support for Direct I/O VT-d by
reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature
offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with
greater reliability, security and availability in networking and data-sharing. The options are
Disabled and Enabled.
SW Guard Extensions (SGX)
Select Enabled to activate the Software Guard Extensions (SGX). The options are Disabled,
Enabled, and Software Controlled.
Select Owner EPOCH input type
There are three Owner EPOCH modes (each EPOCH is 64 bit). The options are No Change
in EPOCHs, Change to New Random Owner EPOCHs, and Manual User Dened Owner
EPOCHs.
PRMRR Size
This feature appears if SW Guard Extensions is set to Enabled. This BIOS must reserve
a contiguous region of Processor Reserved Memory (PRM) in the Porcessor Reserved
Memory Range Register (PRMRR). The options are 32MB, 64MB, and 128MB.
GNA Device (B0:D8:F0)
Use this feature to enable SA GNA device. The options are Enabled and Disabled.
X2APIC Opt Out
The feature "VT-D" must be enabled for this feature to be congurable. Use this feature to
enable or disable X2APIC Opt Out. The options are Enabled and Disabled.
PCH-IO Conguration
PCH-IO Conguration
Port 61h bit-4 Emulation
Select Enabled to enable the emulation of Port 61h bit-4 toggling in SMM (System
Management Mode). The options are Disabled and Enabled.
PCIe PLL SSC
Use this feature to enable or disable PCIe PLL SSC. The options are Enabled and Disabled.