Supermicro X11SCE-F - Page 70

Super X11SCE-F User's Manual
70
PCIe/PCI/PnP Conguration
Option ROM execution
PCI PERR/SERR Support
Use this feature to enable or disable the runtime event for PCI errors. The options are
Disabled and Enabled.
Above 4G MMIO BIOS Assignment
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G Address.
The options are Disabled and Enabled.
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select
Onboard to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Onboard and Offboard.
NVMe Firmware Source
Use this feature to select the NVMe rmware to support booting. The options are Vendor
Dened Firmware and AMI Native Support. The default option, Vendor Dened Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
PCIe/PCI/PnP Conguration
CPU MICRO-LP PCI-E 3.0 X8 OPROM
Use this feature to select which rmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
M.2 PCI-E 3.0 X4 OPROM
Use this feature to select which rmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
Trusted Computing
*This motherboard supports TPM 1.2 and 2.0. The following Trusted Platform
Module (TPM) information will display if a TPM 2.0 module is detected:
• Firmware Version
• Vendor