Supermicro X11SPG-TF - Quick Reference Table

12
Super X11SPG-TF User's Manual
Note: Table is continued on the next page.
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JPTG1 LAN Enable/Disable Pins 1-2 (Enabled)
JWD1 Watchdog Timer Pins 1-2 (Reset)
LED Description Status
LE1 Unit Identier (UID) LED Solid Blue: Unit Identied
LE2 Onboard Power LED Solid Green: Power On
LE3, LE4 M.2 LED Blinking Green: Device Working
LEDM1 BMC Heartbeat LED Blinking Green: BMC Normal
Connector Description
BT1 Onboard Battery
COM2 COM Header
FAN1 ~ FAN4 CPU/System Fan Headers
FANA ~ FAND GPU Fan Headers
IPMI_LAN Dedicated IPMI LAN Port
I-SATA4 ~ I-SATA7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
I-SGPIO2, S-SGPIO1
Serial Link General Purpose I/O Connection Headers (I-SGPIO: SATA use; S-SGPIO: sSATA
use)
JD1 Speaker/Power LED Indicator (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 4-pin BMC External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JNVI
2
C1 NVMe I
2
C Header
JOH1 Overheat LED Indicator
JPI
2
C1 Power I
2
C System Management Bus (SMB) Header
JPWR5 20-pin Main Power Connector
JPWR6 8-pin Power Connector for GPU
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 Unit Identier (UID) Switch
LAN1, LAN2
10GbE
LAN Ports
M.2-H_1, M.2-H_2 Dual M.2 PCI-E 3.0 x4 or SATA 3.0 Slots (Supports M-Key 2280)