Supermicro X11SPG-TF - Page 3

3
Preface
Preface
About This Manual
This manual is written for system integrators, IT technicians and knowledgeable end users.
It provides information for the installation and use of the X11SPG-TF motherboard.
About This Motherboard
The Supermicro X11SPG-TF supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx and
82xx/62xx/52xx/42xx/32xx series (Socket P0-LGA 3647) processor with a thermal design
power (TDP) of up to 205W. Built with the Intel C621 chipset, the X11SPG-TF includes three
PCI-E slots for GPU and AOC support and o󰀨ers such features as SATA 3.0, dual 10GbE
LAN, USB ports, and a built-in PCIe storage solution enhancement via Intel VROC. This
motherboard supports 6-channel, 6-DIMM DDR4 ECC RDIMM/LRDIMM memory with speeds
of up to 2933MHz. The X11SPG-TF is the ideal solution for GPU server platforms that address
the needs of next generation computing. Please note that this motherboard is intended to
be installed and serviced by professional technicians only. For processor/memory updates,
please refer to our website at http://www.supermicro.com/products/.
Note 1: 2933MHz memory is supported by the 82xx/62xx series processors.
Note 2: Intel VROC requires a separate hardware key to enable.
Conventions Used in the Manual
Warning! Indicates high voltage may be encountered while performing a procedure.
Warning! Indicates important information given to prevent equipment/property damage
or personal injury.
Important: Important information given to ensure proper system installation or to
relay safety precautions.
Note: Additional Information given to di󰀨erentiate various models or provides infor-
mation for proper system setup.