Supermicro X11SPG-TF - Page 39

39
Chapter 2: Installation
+
+
SAN MAC
IPMI CODE
BIOS LICENSE
DESIGNED IN USA
MAC CODE
X11SPG-TF
REV: 1.01
BAR CODE
JPWR6
JUIDB1
JPWR5
JPI2C1
JL1
JOH1
JPME2
JWD1
JPG1
JP1
JPTG1
JPCK1
LE1
LE3
LEDM1
LE2
LE4
FAND
FAN1
FAN2
FAN4
FAN3
FANA
FANC
FANB
S-SGPIO1
I-SGPIO2
JP3
JP2
JBT1
MH12
MH10
JTPM1
JSD2
JSD1
JIPMB1
JNVI2C1
JRK1
JSTBY1
BT1
SP1
JD1
I-SATA7
I-SATA6
I-SATA5
I-SATA4
S-SATA1
S-SATA0
JF1
JP4
SXB2A
SXB1A
M.2-H_2 PCI-E 3.0 X4
SXB1B PCI-E 3.0 X16
CPU SLOT3 PCI-E 3.0 X16
SXB2B PCI-E 3.0 X16
USB1
M.2-H_1 PCI-E 3.0 X4
USB4/5(3.0)
USB6/7(3.0)
USB8(3.0)
USB2/3
COM2
LAN2
VGA
CPU
LAN1
DIMMB1
LEDLED12LEDFAIL
ON
DIMMA1
NMIXPWRHDDNICNICUIDPSRSTPWR
DIMMF1 DIMME1 DIMMD1
DIMMC1
IPMI_LAN
USB0
Aspeed
AST2500
Intel
C621
Intel
X550
Unit Identier Switch/UID LED Indicator
A Unit Identier (UID) switch and an LED Indicator are located on the motherboard. The UID
switch is located at JUIDB1, which is next to the VGA port on the back panel. The UID LED
(LE1) is located next to the UID switch. When you press the UID switch, the UID LED will
be turned on. Press the UID switch again to turn o󰀨 the LED indicator. The UID Indicator
provides easy identication of a system unit that may be in need of service.
Note: UID can also be triggered via IPMI on the motherboard. For more information
on IPMI, please refer to the IPMI User's Guide posted on our website at http://www.
supermicro.com.
UID Switch
Pin Denitions
Pin# Denition
1 GND
2 GND
3 Button In
4 Button In
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied
VGA Port
A video (VGA) port is located next to USB1 on the I/O back panel. Refer to the board layout
below for the location.
1 2
3
1. UID Switch
2. UID LED
3. VGA