Super X11SPG-TF User's Manual
74
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select 4
Seconds Override for the user to power o the system after pressing and holding the power
button for 4 seconds or longer. Select Instant O to instantly power o the system as soon
as the user presses the power button. The options are Instant O and 4 Seconds Override.
CPU Conguration
The following CPU information will display:
• Processor BSP Revision
• Processor Socket
• Processor ID
• Processor Frequency
• Processor Max Ratio
• Processor Min Ratio
• Microcode Revision
• L1 Cache RAM
• L2 Cache RAM
• L3 Cache RAM
• Processor 0 Version
Hyper-Threading (ALL) (Available when supported by the CPU)
Select Enable to support Intel Hyper-threading Technology to enhance CPU performance.
The options are Disable and Enable.
Cores Enabled
Set a numeric value to enable the number of cores. (Please refer to the Intel website for more
information.) Enter 0 to enable all cores.
Monitor/MWAIT
Select Enabled to enable the Monitor/Mwait instructions. The Monitor instructions monitors a
region of memory for writes, and Mwait instructions instruct the CPU to stop until the monitored
region begins to write. The options are Auto, Disable, and Enable.
To Next Page
Loading...
