Supermicro X11SPG-TF - Page 78

Super X11SPG-TF User's Manual
78
Package C State Control
Package C State
This feature allows the user to set the limit on the C State package register. The options
are C0/C1 State, C2 State, C6 (Non Retention) State, C6 (Retention) State, No Limit,
and Auto.
CPU T State Control
Software Controlled T-States
Use this feature to enable Software Controlled T-States. The options are Disable and
Enable.
Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system to malfunc-
tion.
North Bridge
This feature allows the user to congure the following North Bridge settings.
UPI Conguration
The following UPI information will display:
• Number of CPU
• Number of Active UPI Link
• Current UPI Link Speed
• Current UPI Link Frequency
• UPI Global MMIO Low Base / Limit
• UPI Global MMIO High Base / Limit
• UPI Pci-e Conguration Base / Size
Degrade Precedence
Use this feature to set degrade precedence when system settings are in conict. Select
Topology Precedence to degrade Features. Select Feature Precedence to degrade Topol-
ogy. The options are Topology Precedence and Feature Precedence.