Supermicro X11SSE-F - Page 41

41
Chapter 2: Installation
1. Manufacturer Mode
BMC
Intel PCH
CPU
USB2 (3.0)
I-SATA6
JSD1
SW2
LED5 JUIDB1
LED6
MAC CODE
BAR CODE
BIOS
LICENSE
JPG1
JKVM1/VGA
USB0/1
BT1
JWD1
JPME2 JPME1
JTPM1
JBT1
CPU MICRO-LP PCI-E 3.0 X8
JPO1
J21
MICRO-LP
DIMMB2 DIMMB1 DIMMA2 DIMMA1
I-SATA0
X11SSE-F
Rev. 1.01
Manufacturer Mode Select
Close pin 2 and pin 3 of jumper JPME2 to bypass SPI ash security and force the system to
operate in the manufacturer mode, which will allow the user to ash the system rmware from
a host server for system setting modications. Refer to the table below for jumper settings.
The default setting is Normal.
Manufacturer Mode
Jumper Settings
Jumper Setting Denition
Pins 1-2 Normal
Pins 2-3 Manufacturer Mode
1