EasyManua.ls Logo

Supermicro X12DPi-N6 - Quick Reference Table

Supermicro X12DPi-N6
178 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPL1 LAN Enable/Disable Pins 1-2 (Enabled)
JPME1 ME Manufacturing Recovery Pins 1-2 (Normal)
LED Description Status
LE3 Power LED LED On: Onboard Power On
LE4 M.2 LED Blinking Green: Device Working
LE6 Unit Identier (UID) LED Solid Blue: Unit Identied
LEDM1 BMC Heartbeat LED
Blinking Green: BMC Normal (Active),
Solid Green: (During BMC Reset or during a Cold Reboot)
Connector Description
Battery (BT1) Onboard battery
COM1 Rear I/O COM port
COM2 Front Accessible COM port header
FAN1 - FAN6, FANA, FANB CPU/System fan headers
BMC_LAN Dedicated BMC LAN port
JF1 Front Control Panel header
JIPMB1 4-pin BMC external I
2
C header
JL1 Chassis Intrusion header
JNCSI NC-SI (Network Controller Sideband Interface) connector (See Note below)
JNVI
2
C NVMe I
2
C header
JPI
2
C1 Power System Management Bus (SMB) I
2
C header
JPWR2/JPWR4 8-pin power connectors
JPWR3 24-pin ATX power connector
JSTBY1 Standby power header
JTPM1 Trusted Platform Module/Port 80 connector
LAN1, LAN2
Ethernet LAN (RJ45) Port 1/ Port 2 (1G LAN support on X12DPi-N6 and 10G LAN support
on X12DPi-NT6)
M.2 PCIe 4.0 x4 M.2 slot (with support of M-Key 2280, and 22110)
MH15, MH16 Mounting holes for M.2 keys (MH15: for M.2 Key 2280, MH16: for M.2 Key 22110)
P1_NVME0/1, P1_NVME2/3 PCIe 4.0 x8 SlimSAS ports with support of four NVMe connections (0/1, 2/3)
I-SATA 0-3, I-SATA 4-7 Intel® PCH SATA 3.0 ports (with RAID 0, 1, 5, 10)
S-SATA 0-3 Intel® PCH S-SATA 3.0 ports (with RAID 0, 1, 5, 10)
S-SATA4/S-SATA5 Intel PCH powered S-SATA 3.0 ports with support for SuperDOM (Disk on Module) devices
SLOT1 PCIe 4.0 x8 slot supported by CPU1
SLOT2/SLOT3 PCIe 4.0 x16 slots supported by CPU1
SLOT4, SLOT5 PCIe 4.0 x16 slots supported by CPU2
Note: For details on how to congure Network Interface Card (NIC) settings, please
refer to the Network Interface Card Conguration User's Guide posted on our website
under the link: http://www.supermicro.com/support/manuals/.

Table of Contents

Related product manuals