Supermicro X12DPi-N6 - 4.5 BMC

Chapter 4: UEFI BIOS
157
4.5 BMC
This submenu displays the status of the Baseboard Management Controller (BMC), and allows
the user to congure the following BMC settings.
• BMC Firmware Revision: This feature indicates the rmware revision of the Baseboard
Management Controller (BMC) used in your system.
• Status of BMC: This feature indicates the status of BMC used in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging upon system boot. The options are Enabled
and Disabled.
Erasing Settings
Erase SEL
Select "Yes, On next reset" to erase all system event logs upon next system boot. Select
"Yes, On every reset" to erase all system event logs upon each system reboot. Select "No"
to keep all system event logs after each system reboot. The options are "No", "Yes, On next
reset", and "Yes, On every reset".
When SEL is Full
This feature allows the user to determine what the BIOS should do when the system event
log is full. Select Erase Immediately to erase all events in the log when the system event log
is full. The options are Do Nothing and Erase Immediately.