Supermicro X12DPi-N6 - Page 158

Super X12DPi-N6/X12DPi-NT6 User's Manual
158
BMC Network Conguration
Update BMC LAN Conguration
Select Yes for the BIOS to implement all IP/MAC address changes upon next system boot.
The options are Yes and No.
*********************************
Congure IPv4 Support
*********************************
BMC LAN Selection
This feature allows the user to select the type of the BMC LAN. The manufacturer default
setting is Failover.
BMC Network Link Status
This feature displays the status of the BMC network link for this system. The manufacturer
default setting is Dedicated LAN.
Conguration Address Source
Use this feature to select the source of the IPv4 Connection. If Static is selected, you will
need to know the IP address of IPv4 connection and enter it to the system manually in the
eld. If DHCP is selected, the BIOS will search for a DHCP ( (Dynamic Host Conguration
Protocol) server in the network that is attached to and request the next available IP address
for the IPv6 connection. The options are DHCP and Static.
Station IP Address
This feature displays the Station IP address in decimal and in dotted quad form (i.e.,
192.168.10.253).
Subnet Mask
This feature displays the sub-network mask that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address
This feature displays the Station MAC address for this computer.
Gateway IP Address
This feature displays the Gateway IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 172.29.0.1).
VLAN
This feature displays the status of VLAN support. The manufacturer default setting is Disabled.