Supermicro X12DPi-N6 - Page 159

Chapter 4: UEFI BIOS
159
*********************************
Congure IPv6 Support
*********************************
IPv6 Address Status
Select Enabled for IPv6 Address status support. The options are Disabled and Enabled.
IPv6 Support
Use this feature to enable IPv6 support. The options are Enabled and Disabled.
Conguration Address Source (Available when "IPv6 Support" is set to Enabled)
Use this feature to select the source of the IPv6 connection. If Static Conguration is selected,
you will need to know the IP address of IPv6 connection and enter it to the system manually
in the eld. If the option of DHCPv6 Stateless or DHCPv6 Stateful is selected, the BIOS will
search for a DHCP server in the network that is attached to and request the next available
IP address for this computer. The options are Static Conguration, DHCPv6 Stateless, and
DHCPv6 Stateful.
IPv6 Address (DHCPv6 Stateless) (Available when "Conguration Address Source"
is set to Static Conguration)
This feature displays the IPv6 Addres. Press <Enter> to change the setting.
Prex Length (Available when "Conguration Address Source" is set to Static
Conguration)
This feature displays the prex length. Press <Enter> to change the setting.
IPv6 Router IP Address
This feature allows you to set the IP address the IPv6 router.