Supermicro X12DPi-N6 - 4.4 Event Logs

Chapter 4: UEFI BIOS
155
Change SMBIOS Event Log Settings
Enabling/Disabling Options
SMBIOS Event Log
Select Enabled to enable System Management BIOS (SMBIOS) Event Logging during system
boot. The options are Disabled and Enabled.
Erasing Settings
Erase Event Log (Available when "SMBIOS Event Log" is set to Enabled)
Select No to keep the event log without erasing it upon next system bootup. Select [Yes,
Next reset] to erase the event log upon next system reboot. The options are No, [Yes, Next
reset], and [Yes, Every reset].
When Log is Full (Available when "SMBIOS Event Log" is set to Enabled)
Select Erase Immediately to immediately erase all errors in the SMBIOS event log when the
event log is full. Select Do Nothing for the system to do nothing when the SMBIOS event log
is full. The options are Do Nothing and Erase Immediately.
4.4 Event Logs
Use this feature to congure Event Logs settings.
Note: After you've made any changes in this section, please reboot the system for the
changes to take effect.