Supermicro X12DPi-N6 - 4.7 Boot

Super X12DPi-N6/X12DPi-NT6 User's Manual
166
4.7 Boot
Use this feature to congure Boot Settings:
Boot Mode Select
Use this feature to select the type of devices from which the system will boot. The options
are LEGACY, UEFI (Unied Extensible Firmware Interface), and Dual.
Note: When the Boot Mode Select feature above is set to Dual, be sure to set all
OPROM-related settings to Legacy.
Fixed Boot Order Priorities
This feature prioritizes the order of a bootable device from which the system will boot. Press
<Enter> on each item sequentially to select devices.
When the feature "Boot Mode Select" is set to Dual (default), the following items will be
displayed for the user to congure the boot settings:
• Boot Option #1 ~ Boot Option #17
When the feature "Boot Mode Select" is set to Legacy, the following items will be displayed
for conguration:
• Boot Option #1 ~ Boot Option #8
When the feature "Boot Mode Select" is set to UEFI, the following items will be displayed
for conguration:
• Boot Option #1 ~ Boot Option #9