Supermicro X12DPi-N6 - Page 165

Chapter 4: UEFI BIOS
165

TCG Storage Security Conguration (Available when TCG
Storage Devices are detected)
Storage Device Name (Available when the storage device is compliant with TCG
specications)
Select this device and press <Enter> to display the following information:
TCG Storage Security Password Description (Unavailable under a security freeze
lock caused by a boot failure)
This feature allows the user to set, modify, and clear the administrative password and
the user password for TCG Storage Security settings. The manufacturer administrative
password that was pre-installed in the factory is used to enable TCG storage security
feature support in this system and is also used to create new user name passwords. You
can reset the administrative password. An administrative password is required to lock or
unlock the TCG storage security settings, while a user password might be used as an option
to unlock a TCG device during Power-On Self-Test (POST) at bootup.
Note: The options of "Setting Administrative Password" and "Setting User Password"
may become unavailable under a security freeze lock caused by a boot failure. To
unlock the security freeze, please perform a cold boot by power off/power on the sys-
tem, press the delete key, and enter the BIOS setup utility at bootup to unfreeze the
security lock.
PASSWORD CONFIGURATION:
This submenu will display the following items for password conguration:
• Security Subsystem Class: The default setting is Pyrite 1.0.
• Security Supported: The default setting is Yes.
• Security Enabled: The default setting is No.
• Security Locked: The default setting is No.
• Security Frozen: The default setting is No.
• Admin Pwd (Password) Status: The default setting is Not Installed.
Set Admin Password
Use this feature to set the administrator password for the storage device(s) for your system.
Device Reset
Use this feature to reset the password conguration for the storage device(s) for your system.