Supermicro X12DPi-N6 - Page 145

Chapter 4: UEFI BIOS
145

Create Namespace
Use this submenu to create a namespace. The following information will display:
Name
Region ID
This feature displays the Region ID of the PMem module. The options are 0x0001 and
0x0001.
Mode
Use this feature to set the Namespace mode. The options are None and Sector.
Capacity Input
Select Remaining to use the maximum memory capacity currently available as system
memory capacity. Select Manual to enter the system memory capacity manually. The options
are Remaining and Manual.
Units
Use this feature to select the type of unit to use when inputting namespace capacity in the
system.
The options are B, MB, MiB, GB, GiB, TB, and TiB.
Capacity:
This feature displays the namespace capacity.
Back to Namespaces
Back to Main Menu
Select this feature and press <Enter> to go back to the Intel® Optane™ Persistent Memory
Conguration menu.