Supermicro X12DPi-N6 - Page 147

Chapter 4: UEFI BIOS
147
Diagnostics
Perform Diagnostic Tests on DIMMs
When you select this submenu and press <enter>, the following items will display:
Choose Diagnostics Type:
Use this feature to choose the type of diagnostics test to be performed on the PMem module
installed in the system
Quick Diagnostics
Select Enabled for the quick diagnostics test to be performed on the PMem module installed
in the system when needed. The options are Enabled and Disabled.
DIMM ID
Select Enabled to display the DIMM ID of a PMem module upon which the diagnostic test
will be performed. The options are Enabled and Disabled. Please note that more DIMM
IDs will appear If more PMem modules are installed on the motherboard.
Cong (Congure) Diagnostics
Select Enabled for the platform conguration diagnostics test to be performed on the PMem
module. The options are Enabled and Disabled.
FW (Firmware) Diagnostics
Select Enabled for the rmware diagnostics test to be performed on the PMem module. The
options are Enabled and Disabled.
Security Diagnostics
Select Enabled for the security diagnostics test to be performed on the PMem module. The
options are Enabled and Disabled.
Execute Tests
Select this feature and press <Enter> to execute the selected diagnostic tests. The following
items will be displayed:
Back to Diagnostics
The status of Diagnostics test will be displayed on this page:
• Quick
• Conguration
• Security
• Firmware