Chapter 4: UEFI BIOS
149
Intel(R) Ethernet Controller (Ethernet controller) -(MAC address)
Note 1: This feature is available when "Onboard LAN Option ROM Type" is set to EFI.
Note 2: The Ethernet controller and MAC addresses shown above are based on you
system features.
Firmware Image Properties
The following information is displayed:
• Option ROM Version
• Unique NVM/EEPROM ID
• NVM Version
NIC Conguration
Link Speed
Use this feature to set the connection speed of a LAN port specied. The options are Auto
Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
If this feature is set to Enabled, the LAN port specied will be enabled when the system is
powered on. The options are Disabled and Enabled.
Blink LEDs
Use this feature to identify the physical network port by blinking the associated LED. The
default setting is 0 (up to 15 seconds).
To Next Page
Loading...
