Supermicro X12DPi-N6 - Front Panel Buttons

51
Chapter 2: Installation
Power Button
UID LED
Reset Button
HDD LED
PWR LED
3.3V Stby/
UID SW
Ground
19
Ground
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
OH/PWR Fail/Fan Fail LED
3.3V
JF1
X
3.3V Stby
3.3V Stby
NIC1 Active LED
X
1. PWR Button
2. Reset Button
Reset Button
Pin Denitions (JF1)
Pin# Denition
3 Reset
4 Ground
Power Button
Pin Denitions (JF1)
Pin# Denition
1 Signal
2 Ground
Power On Button
The Power On button is located on pins 1 and 2 of JF1. Momentarily contacting both pins
will power on/off the system. Refer to the tables below for more information.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Momentarily contacting both
pins will reset the system. Refer to the table below for pin denitions.
1
2