Supermicro X12DPi-N6 - VROC RAID Key Header

59
Chapter 2: Installation
VROC RAID Key Header
A VROC RAID Key header is located at JRK1 on the motherboard. Install a VROC RAID
Key on JRK1 for NVMe RAID support as shown in the illustration below. Please refer to the
layout below for the location of JRK1.
Note: For detailed instructions on how to congure VROC RAID settings, please refer
to the VROC RAID Conguration User's Guide posted on the web page under the link:
http://www.supermicro.com/support/manuals/.
1. VROC RAID Key (JRK1)
VROC Key
Intel VROC Key
Pin Denitions
Pin# Denition
1 Ground
2 3.3V Standby
3 Ground
4 PCH RAID Key
VROC Key Header (JRK1)
C
MAC CODE
BIOS
LICENSE
BMC CODE
JS3 JS1
BMC
BMC
Firmware
BIOS
JM2_1
JF1
LAN1
LAN2
FAN3FAN4
JUSBRJ45
JNCSI
JUIDB1
FANB FANA
F
AN6
FAN2FAN1
JPI2C1
LE4
LE6
JRK1
(Front) VGA
JBT1
JSTBY1
JPME1
JIPMB1
JNVI2C
JPWR4
JPWR2
S-SGPIO
SATA5
SATA6
JPWR3
JLAN2 JLAN1
UID LED
JS2
M.2 Slot
TPM/Port80
PCH
LED
PWR
BMC Heartbeat LED
BMC_LAN/USB7/8(3.0)
P1_NVME2/3
P1_NVME0/1
I-SATA0~3 I-SATA4~7
USB6(3.0) USB4/5(3.0)
USB2/3
(3.0)
USB0/1
(2.0)
S-SATA4 S-SATA5
S-SATA0~3
VGA
COM2
COM1
CMOS CLEAR
UID/BMC
P1-DIMMG1 P1-DIMMF1 P1-DIMME1 P1-DIMMH1
P2-DIMMG1 P2-DIMME1 P2-DIMMF1 P2-DIMMH1
CPU2
CPU1
CPU1 SLOT1 PCIe 4.0 X8
CPU1 SLOT2 PCIe 4.0 X16
CPU1 SLOT3 PCIe 4.0 X16
CPU2 SLOT4 PCIe 4.0 X16
CPU2 SLOT5 PCIe 4.0 X16
CPU2 SLOT6 PCIe 4.0 X8
P1-DIMMB1 P1-DIMMA1 P1-DIMMD1 P1-DIMMC1
P2-DIMMC1 P2-DIMMD1 P2-DIMMB1 P2-DIMMA1
LE3
JL1
BAR CODE
VROC
JVGA
JFP2
LAN CTRL2
JTPM-1
RAID KEY-1
Front Panel CTRL
P2-DIMMB2
P1-DIMMB2
CPLD
FAN5
REV:1.00
X12DPi-N(T)6
LAN CTRL1
(*X12DPI-N6)
X12DPI-NT6
BT1
Battery
Reset
MH15
MH16
NVME
JPL1
LEDM1
1
Location of JRK1
Note: The graphics contained in this user's manual are for illustration only. The compo-
nents installed in your system may or may not look exactly the same as the graphics
shown in the manual.