Supermicro X12SCA-F - Page 72

Super X12SAE/X12SCA-F User's Manual
72
Re-try Boot
If this feature is enabled, the BIOS will automatically reboot the system from a specied boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
Power Conguration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
jumper settings when it is expired for more than ve minutes. The options are Disabled
and Enabled.
AC Loss Policy Depend on
Use this feature to set the power state after a power outage. Select Stay O󰀨 for the system
power to remain o󰀨 after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay O󰀨, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed.
Select 4 Seconds Override for the user to power o󰀨 the system after pressing and holding
the power button for four seconds or longer. Select Instant O󰀨 to instantly power o󰀨 the
system as soon as the user presses the power button. The options are Instant O󰀨 and 4
Seconds Override.
DeepSx Power Policies
This feature enables DeepSx Power Policy conguration. The options are Disabled and
Enabled in S4-S5.
CPU Conguration
The following CPU information will be displayed:
• Installed CPU brand and speed
• CPU Signature
• Microcode Patch
• Max CPU Speed
• Min CPU Speed
• CPU Speed