Supermicro X12SCA-F - Page 78

Super X12SAE/X12SCA-F User's Manual
78
Graphics Conguration
Graphics Conguration
The following graphic information will be displayed:
• IGFX VBIOS Version
• IGFX GOP Version
Note: Only the feature of Primary Display is available for conguring if the installed
CPU doesn’t have integrated graphics.
Graphics Turbo IMON Current
Enter a value for the graphics turbo IMON current. The range is 14-31. The default is 31.
Skip Scanning of External Gfx Card
This feature disables scanning for external graphics cards. When this feature is set to
Enabled, the system will not scan for external graphics cards on PEG and PCH PCI-E
ports. The options are Disabled and Enabled.
Primary Display
This feature controls which graphics device will be used as the primary display. The
options are Auto, IGFX, PEG, and PCI.
Internal Graphics
This feature keeps the IGD (Internal Graphics Device) enabled, based on setup op-
tions. The options are Auto, Enabled, and Disabled.
GTT Size
This feature controls the memory allocation size for the graphics translation table (GTT).
The options are 2MB, 4MB, and 8MB.
Aperture Size
This feature controls the graphics aperture size. For optimal performance, select the
size that matches the installed graphics card's size. The options are 128MB, 256MB,
512MB, 1024MB, and 2048MB.
DVMT Pre-Allocated
This feature controls the DVMT 5.0 Pre-allocated graphics memory size to be used by
the internal graphics device. The options are 0M, 32M, 64M, 4M, 8M, 12M, 16M, 20M,
24M, 28M, 32M/F7, 36M, 40M, 44M, 48M, 52M, 56M, and 60M.