Supermicro X12STL-F - Page 103

Chapter 4: BIOS
103
Delete
Select Yes to delete the variable or No to delete a certicate from the key database.TCG
Storage Security Conguration:

CT250P2SSD8
TCG Storage Password Description:
Use this feature to set, modify, and clear both TCG Storage device Admin and User
passwords. An installed Admin Password is required to enable TCG Storage security
features and to create the User Password.
Using Admin Password alone can lock and unlock the TCG storage device while User
Password acts as an optional credential to unlock the device in POST.
The options, 'Set Admin Password' and 'Set User Password', are grayed out when the
system detects a security freeze lock caused by the boot failure.
Perform a cold boot (power o󰀨 and then power on) on the system and press the hot key
to enter BIOS.
PASSWORD CONFIGURATION:
Security Subsystem Class: Pyrite 1.0
Security Supported: Yes
Security Enabled: No
Security Locked: No
Security Frozen: No
User Pwd Status: Not INSTALLED
Admin Pwd Status: INSTALLED
Set Admin Password
This feature allows you to set the administrator password, which is required to enter the
BIOS setup utility. The length of the password should be three to 20 characters.
Set User Password
This feature allows you to set up the user password, which is required to enter the BIOS
setup utility. It is grayed out by default but will be available for setup when the admin
password is entered. The length of the password should be three to 20 characters.
Device Reset
This feature allows you to reset the device to the Original Factory State and it will completely
erases the user data from the hard drive.