Supermicro X12STL-F - Motherboard Features Overview

14
Super X12STL-F User's Manual
Note: The table above is continued on the next page.
Motherboard Features
CPU
• Supports an Intel Xeon E-2300 Family and 10th Generation Pentium (Socket H5 - LGA 1200) series processor
Memory
• Up to 128GB of ECC UDIMM DDR4 memory with speeds of up to 3200MHz in four memory slots
Note: Speed support is up to 2666MHz when a Pentium processor is installed. Speed support is up to 2933 MHz
for 2R2R congurations.
DIMM Size
• 4GB, 8GB, 16GB, 32GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel C252
Expansion Slots
• Six SATA 6Gb/s (support RAID 0, 1, 5, 10 and DOM power)
• Three PCIe 4.0 slots: 2x8 (1 in x16), 1x4 (in x8) (*Note: When a Pentium processor is installed, Slot 7 will be disabled,
and Slot 5 & Slot 6 will run at PCIe 3.0 x8.)
• One PCIe 3.0 Slot: 1x2 (in x4)
• One M.2 PCIe 3.0 x4 connector (Supports M-key 2280 and 22110)
Super I/O
• AST2600
Peripheral Devices
• Four USB 2.0 ports (two on the rear I/O panel, two via headers)
• Five USB 3.2 ports (two on the rear I/O panel, one Type-A, two via headers)
• Two SuperDOM with support for power connectors
BIOS
• 256Mb AMI BIOS
®
SPI Flash BIOS
• ACPI 6.0, Plug and Play (PnP), BIOS rescue hot-key, and SMBIOS 3.0 or later
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Wake-on-LAN
Motherboard Features