Supermicro X12STL-F - Page 15

15
Chapter 1: Introduction
Motherboard Features
System Health Monitoring
• Onboard voltage monitoring for +12V, +5V, +3.3V, CPU, Memory, VBAT, +3.3V stdby, CPU temperature, PCH temperature,
system temperature
• 6 CPU switch phase voltage regulator
• CPU thermal trip support
• Platform Environment Control Interface (PECI)/TSI
Fan Control
• Low noise fan speed control
• Dual cooling zone
• Six 4-pin fan headers
System Management
• Trusted Platform Module (TPM) support
• SuperDoctor® 5
• Chassis intrusion header and detection
LED Indicators
• Unit Identier LED (LED1)
• BMC Heartbeat LED (LEDM1)
• M.2 Activity LED (LED3)
• Power Status LED (LED4)
• BMC LAN LED
Dimensions
• Dimensions: 9.6"(W) x 9.6"(L) (243.8 mm x 243.8 mm)
Note: The CPU maximum thermal design power (TDP) is subject to chassis and
heatsink cooling restrictions. For proper thermal management, please check the chas-
sis and heatsink specications for proper CPU TDP sizing.