Supermicro X12STL-F - Ipmi

Super X12STL-F User's Manual
94
4.5 IPMI
Use this menu to congure Intelligent Platform Management Interface (IPMI) settings.
When you select this submenu and press <Enter>, the following information will display:
• BMC Firmware Revision: This displays the rmware revision of the Baseboard Manage-
ment Controller (BMC) used in your system.
• IPMI Status: This displays the status of IPMI used in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at boot up. The options are Disabled and Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.