Chapter 4: BIOS
93
SMBIOS Event Log Standard Settings
Log System Boot Event
Select Enabled to log system boot events. The options are Enabled and Disabled.
MECI
Enter the increment value for the multiple event counter. Enter a number between 1 to 255.
The default setting is 1.
METW
This feature is used to determine how long (in minutes) the multiple event counter should
wait before generating a new event log. Enter a number between 0 to 99. The default
setting is 60.
Note: All values changed here do not take eect until the computer is restarted.
View SMBIOS Event Log
This feature allows you to view the event in the system event log. Select this feature and
press <Enter> to view the status of an event in the log. The following information will be
displayed:
Date/Time/Error Code/Severity
To Next Page
Loading...
