Supermicro X12STL-F - Front Control Panel

35
Chapter 2: Installation
2.6 Front Control Panel
The front control panel header (JF1) contains header pins for various buttons and indicators
that are normally located on a control panel at the front of the chassis. These connectors
are designed specically for use with Supermicro chassis. See the gure below for the
descriptions of the front control panel buttons and LED indicators.
BMC
JPG1
JWD1
I-SGPIO1
I-SGPIO2
M.2-P
M.2 NVME
I-SATA4
I-SATA3
I-SATA2
MEGERAC
LICENCE
BT1
CPU SLOT6 PCIe 4.0 x8 (IN x16)
PCH SLOT4 PCIe 3.0 x2 (IN x4)
CPU SLOT5 PCIe 4.0 x8
JBT1
REV:1.01
X12STL-F
JUIDB1
LED1
LEDM1
JPCIE7
FAN4
COM2
USB2/3
JIPMB1
JPME2
JPWR2
JPWR1
JPI2C1
JF1
USB6/7 (3.0)
JL1
JSD2
JSD1 USB8(3.0)
LED4
LED3
JSTBY1
FAN1FAN2
FAN3
FANAFANB
I-SATA1
I-SATA0
JPCIE6
JPCIE5
JPCIE4
JPCIE5
MH10
MH11
JTPM1
CPU SLOT7 PCIe 4.0 x4 (IN x8)
DIMMB1 DIMMA2 DIMMB2 DIMMA1
USB0/1
BMC_LAN
COM1
VGA
LAN2
LAN1
USB4/5
I-SATA5
CHASSIS INTRUSION
PWRI2C
DESIGNED IN USA
M.2
CPU
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
OH/Fan Fail/PWR Fail LED
3.3V Stby
Figure 2-2. JF1 Header Pins