Supermicro X12STL-F - Page 36

36
Super X12STL-F User's Manual
1. PWR Button
2. Reset Button
Reset Button

Pin# 
3 Reset
4 Ground
Power Button

Pin# 
1 Signal
2 Ground
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/o󰀨 the system. Refer to the table below for pin denitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Momentarily contacting both
pins will reset the system. Refer to the table below for pin denitions.
1
2
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
Ground
19
X
Ground
X
3.3V Stby
20
1 2
Ground
Power Fail LED
NIC2 Active LED
NMI
3.3V
OH/Fan Fail/PWR Fail LED
3.3V Stby