Supermicro X12STL-F - Page 108

Super X12STL-F User's Manual
108
Default Options
Restore Optimized Defaults
To set this feature, select Restore Defaults from the Exit menu and press <Enter>. These are
factory settings designed for maximum system performance but not for maximum stability.
Save as User Defaults
To set this feature, select Save as User Defaults from the Exit menu and press <Enter>. This
enables you to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Exit menu and press <Enter>. Use
this feature to retrieve user-dened settings that were saved previously.
Boot Override
This feature allows you to override the Boot priorities sequence in the Boot menu, and
immediately boot the system with a device specied by the user instead of the one specied
in the boot list. This is a one-time override.
(B1/D0/F0) UEFI PXE IPv4 Intel(R) I210 Gigabit Newtwork Connection
(MAC:3cecef317e00)
(B2/D0/F0) UEFI PXE IPv4 Intel(R) I210 Gigabit Newtwork Connection
(MAC:3cecef317e01)
(B1/D0/F0) UEFI PXE IPv6 Intel(R) I210 Gigabit Newtwork Connection
(MAC:3cecef317e00)
(B2/D0/F0) UEFI PXE IPv6 Intel(R) I210 Gigabit Newtwork Connection
(MAC:3cecef317e01)
UEFI: Built-in EFI Shell
