Supermicro X12STL-F - Page 74

Super X12STL-F User's Manual
74

DMI Max Link Speed
Use this feature to select DMI Max Link Speed. The options are Gen1, Gen2, and Gen3.
DMI Gen3 ASPM Control
Use this feature to set the Active State Power Management (ASPM) state on the System
Agent (SA) side of the DMI Link. The options are Disable, Auto, ASPM L0s, ASPM L1,
and ASPM L0sL1.
DMI De-emphasis Control
Use this feature to congure the De-emphasis control on DMI. The options are -6 dB and
-3.5 dB.

PCI Express Root Port 1/ Port 2/ Port3/ Port4
Use this feature to control the PCIe Root Port. The options are Disabled and Enabled.
ASPM
Use this feature to set the Active State Power Management (ASPM) level for a PCIe
device. Select Auto for the system BIOS to automatically set the ASPM level based on
the system conguration. Select Disabled to disable ASPM support. The options are
Disabled, L0s, L1, and L0sL1.
PCIe Speed
Use this to congure PCIe speed. The options are Auto, Gen1, Gen2, Gen3 and Gen4
PEG 0:1:0 Not present
PEG 0:1:1 X4 Gen3
PEG 0:1:2 Not present
PEG 0:6:0 Not present
Internal Graphics
Keep IGFX enabled based on the setup options. The options are Disabled and Enabled.

This feature controls automatic/manual Stop Grant conguration. The options are Manual
and Auto.
*If the above option is set to Manual, Number of Stop Grant Cycles will be available
for conguration.