Supermicro X12STL-F - Page 87

Chapter 4: BIOS
87
• Interface Type
• MAC address
• Host addresses
• Route Table
• Gateway addresses
• DNS addresses
Interface ID
This feature shows the interface ID for the specied network device.
DAD Transmit Count
This feature sends Neighbor Solicitation messages while performing a Duplicate Address
Detection (DAD) to make sure there is no IP address duplication. A value of zero means
a DAD has not been performed. The default setting is 1.
Policy
Use this feature to select an automatic or manual policy. The options are Automatic and
Manual.
*If the above option is set to Manual, Advanced Conguration will be available for
conguration.

New IPv6 address
Use this option to manually congure IP address. Separate the IP address with blank
space to congure more than one address.
New Gateway address
Use this option to manually congure Gateway IP address. Separate the IP address with
blank space to congure more than one address.
New DNS address
Use this option to manually congure the DNS address. Separate the IP address with
blank space to congure more than one address.
Commit Changes and Exit
Use this feature to save all changes and exit.