Super X13DAI-T User's Manual
100
CPU P State Control
This feature allows you to congure the following CPU power settings:
AVX P1 (Available when "SpeedStep (P-States)" is set to Enable)
Use this feature to set the appropriate TDP level for the system. The Intel Advanced
Vector Extensions (Intel AVX) P1 feature allows you to set the base P1 ratio for Stream-
ing SIMD Extensions (SSE) and AVX workloads. Each P1 ratio has the corresponding
AVX Impressed Current Cathodic Protection (ICCP) pre-grant license level, which refers
to the selection between dierent AVX ICCP transition levels. The options are Nominal,
Level 1, and Level 2.
Intel SST-PP (Available when "SpeedStep (P-States)" is set to Enable and
"Dynamic SST-PP" is set to Disable)
This feature allows you to choose from two additional Base-Frequency conditions maxi-
mum for CPU P State Control. The options are Auto, Level 0, Level 3, and Level 4.
(SST-PP is the abbreviation for Speed Select Technology-Performance Prole.)
Dynamic SST-PP (Available when "SpeedStep (P-States)" is set to Enable and
when your CPU supports the Intel Speed Select function)
If this feature is set to Enable, it allows you to congure Intel SST-PP features, including
Base, Conguration 3, and Conguration 4 settings under various processor working
conditions. The options are Disable and Enable.
The following information is displayed when "SpeedStep (P-States)" is set to Enable:
• SST-PP Level
• Capable
• Core Count
• P1 Ration
• Package TDP (W)
• DTS_Max
Activate SST-BF (Available when your CPU supports the Intel Speed Select
function)
Select Enable for Intel Speed Select Technology-Base Frequency support. The options
are Disable and Enable. (SST-BF is the abbreviation for Speed Select Technology-Base
Frequency.)
To Next Page
Loading...
Need help?
General
