Supermicro X13DAI-T - Page 114

Super X13DAI-T User's Manual
114
Enhanced PPR
Use this feature to set advanced memory test. Select Enabled to always execute for
every boot. Select Once to execute only one time. The options are Disabled, Enabled,
and Once.
Memory PFA Support (Available when the DCMS key is activated)
Select Enabled to enable memory Predictive Failure Analysis (PFA) support. PFA can
be used to avoid uncorrectable faults in the same memory page. The options are
Disabled and Enabled.
IIO Conguration
CPU1 Conguration / CPU2 Conguration
IOU0 (IIO PCIe Port 1)
This feature is CPU-dependent. Use this feature to congure the PCIe Bifurcation set-
ting for a PCIe port specied by the user. The options are Auto, x4x4x4x4, x4x4x8,
x8x4x4, x8x8, and x16.
IOU1 (IIO PCIe Port 2)
This feature is CPU-dependent. Use this feature to congure the PCIe Bifurcation set-
ting for a PCIe port specied by the user. The options are Auto, x4x4x4x4, x4x4x8,
x8x4x4, x8x8, and x16.
IOU2 (IIO PCIe Port 3)
This feature is CPU-dependent. Use this feature to congure the PCIe Bifurcation set-
ting for a PCIe port specied by the user. The options are Auto, x4x4x4x4, x4x4x8,
x8x4x4, x8x8, and x16.
IOU3 (IIO PCIe Port 4)
This feature is CPU-dependent. Use this feature to congure the PCIe Bifurcation set-
ting for a PCIe port specied by the user. The options are Auto, x4x4x4x4, x4x4x8,
x8x4x4, x8x8, and x16.
IOU4 (IIO PCIe Port 5)
This feature is CPU-dependent. Use this feature to congure the PCIe Bifurcation set-
ting for a PCIe port specied by the user. The options are Auto, x4x4x4x4, x4x4x8,
x8x4x4, x8x8, and x16.