Supermicro X13DAI-T - Page 141

Chapter 4: UEFI BIOS
141
KMS Security Policy (Available when "TPM Security Policy" and "USB Security
Policy" are set to Disabled)
Set this feature to Enabled to enable the KMS Security Policy. The options are Disabled and
Enabled. The default setting is Disabled. Save settings (you can press <F4>) and reboot the
system for changes to take e󰀨ect.
Note 1: Be sure that the KMS Server is ready before conguring this feature.
Note 2: Use the professional KMS Server solutions (e.g., Thales Server) or the
Supermicro PyKMIP Software Package to establish the KMS Server.
KMS Server Retry Count (Available when "TPM Security Policy" and "USB Security
Policy" are set to Disabled)
Use this feature to specify how many times of connection retrying to the KMS server. The
valid range is 0–10. Press "+" or "-" on your keyboard to change the value. The default setting
is 5 (times). The value of 0 indicates a innite-retrying.