Supermicro X13DAI-T - Page 152

Super X13DAI-T User's Manual
152
LUN Busy Retry Count
LUN stands for logical unit number, which is used to identify a logical/physical disk. Use
this feature to set the number of retries in two-second intervals when LUN is busy. The
valid value is 0–60.
IP Version
This feature controls whether IPv4 or IPv6 network address will be used for the iSCSI
initiator and targets. The options are IPv4 and IPv6. Conguring this feature will reset
all IP related elds.
iSCSI Initiator Parameters
The following information is displayed:
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS
• Secondary DNS
iSCSI Name
Use this feature to enter the unique initiator name in iSCSI qualied name (IQN) format.
CHAP ID (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the iSCSI initiator CHAP ID (up to 128 characters).
CHAP Secret (Available when "CHAP Authentication" is set to Enabled)
Use this feature to enter the iSCSI initiator CHAP secret (password). The valid value is
12–16 (characters).
iSCSI First Target Parameters
Connect
Use this feature to enable or disable the rst target establishment. The options are Dis-
abled and Enabled.
IP Address
Use this feature to congure the rst target IP address.