Supermicro X13DAI-T - Page 156

Super X13DAI-T User's Manual
156
Certication GUID
Press <Enter> and input the certication GUID.
Commit Changes and Exit
Use this feature to save all changes and exit TLS settings.
Discard Changes and Exit
Use this feature to discard all changes and exit TLS settings.
Delete Certication
This feature is used to delete the certicate if a certicate has been enrolled in the system.
Intel(R) Virtual RAID on CPU
Note: It is available when your system supports this feature and when "Enable/Disable
VMD" is set to Enable.
The following information is displayed:
• Intel(R) VROC with VMD Technology x.x.x.xxxx
• Upgrade key:
• Intel VROC Managed Controllers:
• Memory controller ID
Driver Health
This feature displays the health information of the drivers installed in your system, including
LAN controllers, as detected by the BIOS. Select one and press <Enter> to see the details.
Note: This section is provided for reference only, for the driver health status will dif-
fer depending on the drivers installed in your system. It's also based on your system
conguration and the environment that your system is operating in.