To Next Page

To Previous Page

Super X13DAI-T User's Manual

160

When SEL is Full (Available when "SEL Components" is set to Enabled)

This feature allows you to determine what the BIOS should do when the system event log

is full. Select Erase Immediately to erase all events in the log when the system event log is

full. The options are Do Nothing and Erase Immediately.

Note: After making changes on a setting, be sure to reboot the system for the changes

to take e󰀨ect.

BMC Network Conguration

Update BMC LAN Conguration

Select Yes for the BIOS to implement all IP/MAC address changes upon next system boot.

The options are No and Yes.

********************************

Congure IPv4 Support

******************************

BMC LAN Selection

Use this feature to select the type of the IPMI LAN. The default setting is Failover.

BMC Network Link Status:

This feature displays the status of the IPMI network link for this system. The default setting

is Dedicated LAN.

Conguration Address Source (Available when "Update BMC LAN Conguration" is

set to Yes)

Use this feature to select the source of the IPv4 connection. If Static is selected, you will

need to know the IP address of IPv4 connection and enter it to the system manually in the

eld. If DHCP is selected, the BIOS will search for a Dynamic Host Conguration Protocol

(DHCP) server in the network that is attached to and request the next available IP address

for this computer. The options are Static and DHCP.

Station IP Address (Available when "Conguration Address Source" is set to Static)

This feature displays the Station IP address in decimal and in dotted quad form (i.e.,

172.29.176.131).

Subnet Mask (Available when "Conguration Address Source" is set to Static)

This feature displays the sub-network that this computer belongs to. The value of each three-

digit number separated by dots should not exceed 255.

Supermicro X13DAI-T User Manual

Questions and Answers: