Supermicro X13DAI-T User Manual

Super X13DAI-T User's Manual
98
Rear USB Port(s) (Available when "Lockdown Mode" is set to Enabled with the
DCMS key)
Select Enabled to allow the specic type of USB devices to be used in the rear USB ports.
Select Enabled (Dynamic) to allow or disallow this particular type of USB devices to be used
in the rear USB ports without rebooting the system. The options are Enabled, Disabled, and
Enabled (Dynamic).
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power O󰀨 for the system
power to remain o󰀨 after a power loss. Select Power On for the system power to be turned
on after a power loss. Select Last State to allow the system to resume its last power state
before a power loss. The options are Stay O󰀨, Power On, and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override to power o󰀨 the system after pressing and holding the power button for
four seconds or longer. Select Instant O󰀨 to instantly power o󰀨 the system as soon as the
user presses the power button. The options are Instant O󰀨 and 4 Seconds Override.

CPU Conguration
Warning: Setting the wrong values for the features included in the following sections may cause
the system to malfunction.
Processor Conguration
The following CPU information is displayed:
• Processor BSP Revision
• Processor Socket
• Processor ID
• Processor Frequency
• Processor Max Ratio
• Processor Min Ratio
• Microcode Revision
• L1 Cache RAM (Per Core)
• L2 Cache RAM (Per Core)

Supermicro X13DAI-T Specifications

General

Brand	Supermicro
Model	X13DAI-T
Category	Motherboard
Language	English