EasyManua.ls Logo

Supermicro X13SAE - Led Indicators; Memory Population Guidelines

Supermicro X13SAE
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ContaCt InformatIon
www.supermicro.com (Email: support@supermicro.com)
Manuals: http://www.supermicro.com/support/manuals
Drivers & Utilities: https://www.supermicro.com/wdl/driver/
Safety: http://www.supermicro.com/about/policies/safety_information.cfm
The X13SAE/X13SAE-F motherboard supports a single 12
th
/13
th
Generation Intel Core™ i9/i7/i5/i3 series processor, up to 128GB of Unbuffered
(UDIMM) ECC/Non-ECC DDR5 memory with speeds of up to 4400MT/s in four 288-pin memory slots. Populating these DIMM slots with a
pair of memory modules of the same type and size will result in interleaved memory, which will improve memory performance.
Notes: 1) For memory optimization, use only DIMM modules that have been validated by Supermicro. For the latest memory updates,
please refer to our website at http://www.supermicro.com/products/motherboard.
2) Always connect the power cord last, and always remove it before adding, removing, or changing any hardware components.
DIMM Memory Installation
Memory Population Guidelines
When installing memory modules, the DIMM slots should be populated in the following order: DIMMA2, DIMMB2, DIMMA1,
DIMMB1.
To optimize memory performance, please use (DDR5) memory of the same type, size, and speed on the motherboard.
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM.
In a given channel, the black slot can be enabled only when the gray slot is populated rst.
LED Indicators
LED Description Color/State
BMC_HB_LED
X13SAE: Standby Power LED
X13SAE-F: BMC Heartbeat LED
X13SAE: Solid Green (Standby Power On)
X13SAE-F: Blinking Green (BMC Normal)
CATERR_LED Catastrophic Error LED Solid Orange: System CATERR
LED4 Unit Identier (UID) LED (X13SAE-F, IPMI only) Solid Blue: Unit Identied
PWR_LED Onboard Power LED Solid Green: Power On
CPU and Memory Support
Recommended Population (Balanced)
DIMMA1 DIMMB1 DIMMA2 DIMMB2 Total System Memory
8GB DIMM 8GB DIMM 16GB
8GB DIMM 8GB DIMM 8GB DIMM 8GB DIMM 32GB
16GB DIMM 16GB DIMM 32GB
16GB DIMM 16GB DIMM 16GB DIMM 16GB DIMM 64GB
32GB DIMM 32GB DIMM 64GB
32GB DIMM 32GB DIMM 32GB DIMM 32GB DIMM 128GB
LED Indicators
Towards the CPU
DIMMA2 (Gray Slot)
DIMMA1 (Black Slot)
DIMMB2 (Gray Slot)
DIMMB1 (Black Slot)
Memory Support
Frequency 3600MT/s 4000MT/s 4400MT/s
DIMM A1 2R DIMM 1R DIMM N/A
DIMM A2 2R DIMM 1R DIMM 1R or 2R DIMM
DIMM B1 2R DIMM 1R DIMM N/A
DIMM B2 2R DIMM 1R DIMM 1R or 2R DIMM

Other manuals for Supermicro X13SAE

Related product manuals