Supermicro X13SAE - Device Installation

M.2 Device Installation Instructions
M.2 Device Installation
DIMMA1
DIMMA2
DIMMB1
DIMMB2
BMC
BIOS LICENSE
X13SAE-F
DESIGNED IN USA
REV:1.00
PCH
2280
2280
2280
This motherboard has three PCIe 4.0 M.2
M-key sockets that support the M.2 2280
module. One stando󰀨 is pre-installed into
the position of 2280 mounting hole. Refer
to the illustration on the right for the loca-
tions of M.2 sockets and mounting holes.
Follow the steps below to install the M.2
device.
1. Locate the pre-installed stando󰀨 and
screw. Remove the screw and set it
aside.
2. Carefully insert the M.2 device into
the M.2 socket and lower the semi-
circle notched end onto the stando󰀨.
3. Tighten the stando󰀨 screw to secure
the M.2 device into place. Do not
overtighten so as to avoid damaging
the M.2 device.
X13SAE/X13SAE-F QUICK REFERENCE GUIDE
M.2 Device Installation Instructions