Supermicro X13SAE - Jumpers and Connectors

Package contents
• One Supermicro Motherboard
• Four SATA Cables
• One I/O Shield
• One Quick Reference Guide
Connector Description
12V_PUMP_PWR1 12V 4-pin Power Connector (for CPU liquid cooling pump)
AUDIO Back Panel High Denition Audio Ports
AUDIO_FP Front Panel Audio Header
BT1 Onboard Battery
COM1 COM Header
CPU_FAN1, CPU_FAN2,
SYS_FAN1 - SYS_FAN3
CPU_FAN1, CPU_FAN2: CPU Fan Headers
SYS_FAN1 - SYS_FAN3: System Fan Headers
DP, HDMI Back Panel DisplayPort 1.4a and High Denition Multimedia Interface (HDMI) 2.0b Port
DVI Digital Video Interface (DVI-D)
I-SATA0 - I-SATA7 Intel® Serial ATA (SATA 3.0) Ports (6 Gb/second)
IPMI_LAN Dedicated IPMI LAN Port (X13SAE-F only)
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JLED1 3-pin Power LED Header
JPI2C1 Power Supply SMBus I
2
C Header (X13SAE-F only)
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JSD1 SATA DOM (Disk-On-Module) Power Connector
JSTBY1 Standby Power Header (5V)
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
LAN1, LAN2 LAN1: RJ45 1 Gb LAN Port. LAN2: RJ45 2.5 Gb LAN Port
MH10, MH14, MH15 M.2 Device Mounting Holes
PCI-E M.2-M1,
PCI-E M.2-M2,
PCI-E M.2-M3
PCIe 4.0 x4 M.2 M-key Sockets (Support 2280 form factor)
* Small form factor devices and other portable devices for high speed NVMe SSDs
SLOT1 PCI 33MHZ PCI Slot (32 Bit/33 MHz with 5V single voltage)
(PCH) SLOT2, (PCH) SLOT5 PCIe 3.0 x4 Slots
(CPU) SLOT4 PCIe 5.0 x8 (IN x16) Slot
(CPU) SLOT7 PCIe 5.0 x16 Slot
SP1 Internal Speaker/Buzzer
UID Unit Identier (UID) Switch (X13SAE-F only)
USB0, USB1 Back Panel USB 2.0 Ports
USB2/3 Front Access USB 2.0 Header
USB4/5 Front Access USB 3.2 Gen. 1 Header (5 Gb)
USB6 Internal USB 3.2 Gen. 1 Connector (5 Gb, vertical Type-A)
USB7, USB8, USB9 Back Panel USB 3.2 Gen. 2x1 Ports (10 Gb, Type-A)
USB10 Back Panel USB 3.2 Gen. 2x2 Port (20 Gb, Type-C)
USB11 Front Access USB 3.2 Gen. 2x2 Header (20 Gb, Type-C)
VGA VGA Port (X13SAE-F only)
Jumpers and Connectors
Jumper Description Default
JBT1 Clear CMOS (Onboard) Short Pads to Clear CMOS
JD1 Speaker/Buzzer
Pins 1-4: External Speaker
Pins 3-4: Buzzer (Default)
JPAC1 HD Audio Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable (X13SAE-F only) Pins 1-2 (Enabled)
JPL1, JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (Reset)
Connectors
Jumpers