MNL-2425-QRG-10a
© 2023 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without
Supermicro's written consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time
of printing; however, it is not guaranteed.
Notes
• Graphics shown in this quick reference guide are for illustration only. Your components may or
may not look exactly the same as drawings shown in this guide.
• Refer to Chapter 2 in the User's Manual for detailed information on jumpers, connectors, LED
indicators, memory support and CPU/motherboard installation instructions.
Back Panel I/O Connectors
1. DisplayPort 1.4a 6. USB0: USB 2.0 Port 11. LAN2: 2.5Gb LAN Port 16. S/PDIF Out
2. HDMI 2.0b Port 7. USB1: USB 2.0 Port
12. USB8: USB 3.2 Gen. 2x1 Port
(10 Gb, Type-A)
17. Line In
3. VGA Port (X13SAE-F only) 8. LAN1: 1Gb LAN Port
13. USB9: USB 3.2 Gen. 2x1 Port
(10 Gb, Type-A)
18. Line Out
4. Digital Video Interface (DVI-D)
9. USB7: USB 3.2 Gen. 2x1 Port
(10 Gb, Type-A)
14. Center/LFE Out 19. Mic In
5. Dedicated IPMI LAN Port
(X13SAE-F only)
10. USB10: USB 3.2 Gen. 2x2 Port
(20 Gb, Type-C)
15. Surround Out
20. UID Switch
(X13SAE-F only)
CPU Installation
Heatsink Installation
Front Control Panel (JF1)
Power Button
OH/Fan Fail LED
20
NIC1 LED
Reset Button
19
Power Fail LED
HDD LED
Power LED
#3~4
#1~2
Vcc
Vcc (X13SAE)
UID SW (X13SAE-F)
Vcc
Vcc
Ground
Ground
21
Vcc
X
Ground
NMI
X
Vcc
NIC2 LED
CPU notch
CPU load
bracket notch
Pin 1
Screw
Screw
Screw
Motherboard
1
2
X13SAE-F
3
4
5
6
7
8
13
11
12
14
15
16
18
19
20
17
9
10
To Next Page
Loading...
