Supermicro X13SAE - 4.6 IPMI (X13 SAE-F only)

Chapter 4: UEFI BIOS
105
4.6 IPMI (X13SAE-F only)
Use this feature to congure Intelligent Platform Management Interface (IPMI) settings.
Notes: 1. This feature is supported by X13SAE-F only. 2. When changing a setting in this
section, be sure to reboot the system for the changes to take e󰀨ect.
BMC Firmware Revision
This feature indicates the IPMI rmware revision used in your system.
IPMI Status (Baseboard Management Controller)
This feature indicates the status of the IPMI rmware installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at boot up. The options are Disabled and
Enabled.